CONTRACTURE FOOTPLATE OPTION
PROCEDURE 11 | CONTRACTURE FOOTPLATE OPTION | |
|
|
|
INSTALLING THE CONTRACTURE ASSEMBLY - FORWARD MOUNT (FIGURE 2)
NOTE: The number of mounting positions on the contracture assembly may vary due to the width of the wheelchair.
1.Align the mounting holes of the outer tube with the mounting holes of the insert tube of the crossmember assembly.
2.Align the mounting holes of the contracture footplate assembly with two (2) desired mounting positions of the crossmember assembly.
3.Secure the contracture assembly to the crossmember assembly with the two (2) mounting screws, washers and locknuts provided. Securely tighten.
4.If necessary, repeat STEPS
|
|
|
| |
| Washers |
| ||
Lock Nuts |
|
| Mounting Holes | |
| ||||
Insert Tube | ||||
Contracture | ||||
|
|
| ||
|
|
| Assembly | |
Outer Tube | Mounting Screws | |||
FIGURE 2 - REMOVING/INSTALLING THE CONTRACTURE ASSEMBLY -
FORWARD MOUNT
INSTALLING THE CONTRACTURE ASSEMBLY - REVERSED MOUNT (FIGURE 3)
1.Remove the contracture footplate. Refer to CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT in this procedure of the manual.
2.Align the mounting holes of the contrac- ture footplate assembly with two (2) desired mounting positions of the crossmember assembly.
3.Secure the contracture assembly to the crossmember assembly with two (2) mounting screws, washers and locknuts provided. Securely tighten.
Lock | Washers |
|
|
| |
Nuts |
|
|
Insert Tube |
| Outer Tube |
|
| |
|
| Mounting |
|
| Screws |
Mounting Hole | Contracture Assembly | |
|
| |
4.Reinstall the contracture footplate. Refer
to CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT in this procedure of the manual.
5.If necessary, repeat STEPS
Solara™ | 66 | Part No. 1080556 Rev. I |
