Invacare 1080556 manual Specifications

SPECIFICATIONS

SPECIFICATIONS

INVACARE SOLARA

SPECIFICATIONS

Overall Width:

Overall Depth:

Overall Height:

Shipping Weight:

Anti-Tippers:

Footrest:

Armrests:

Seat:

Seat Pan Color:

Back:

Back Angle Adjustment: Rear Axle:

Rear Wheels:

Handrims:

Caster Size:

Seat Width:

Seat Depth:

Back Height:

Wheel Locks:

Tilt-In-Space:

Recliner Back:

Frame:

Seat Width + 8-1/4-inches (Example: 16-inch Wide Wheelchair =

24-1/4-inches Overall Width)

W/O Front Riggings

Short Frame - 29-1/2-inches

Medium Frame - 32-1/2-inches

Long Frame - 34-1/2-inches

*Seat-to-Floor Height + 21-inches (20-inch back canes)

*Seat-to-Floor Height + 25-inches (24-inch back canes)

57lbs.

Standard

Swing-Away Footrest (Standard)

Articulating Swing-Away Footrest (Optional)

Dual Point - Adjustable Height

Dual Point Fixed Height - Desk Length

Dual Point Fixed Height - Full Length

Locking Cantilever Arms- Desk or Full length

Non-locking Cantilever Arms

Adjustable Height - T-Arms

Optional

Black

Optional

90° to 120°

Quick-Release

Fixed

12-inches Pneumatic (Standard); 12-inch Pneumatic w/flat free (Optional); 20 and 22-inch Pneumatic, Urethane or Pneumatic w/flat free (Optional)

Aluminum Handrims

6 x 2-inch w/ Precision Sealed Bearings (Standard) 8-inch w/ Precision Sealed Bearings (Optional)

6 x 1-inch w/ Precision Sealed Bearings (Optional)

12 to 22-inches

Short Frame - 15-17-inches

Medium Frame - 18-20-inches

Long Frame - 20-22-inches

20 and 24-inches

Push-to-Lock (Standard)

Dual Cable Trigger Mechanism (Standard) - 45° of Tilt

Dual Cable Trigger Mechanism (Optional) - 0° to 180° of Tilt

Steel

*NOTE: The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If wheelchair is equipped with urethane tires, subtract 1/4-inch from the measurements listed above. All heights are measured with properly inflated new tires. These heights can vary +1/4-inch due to tire wear.

Solara™ 8 Part No. 1080556 Rev. I