q

w

t

Setting the Thread Cones or Spools of Thread

Use the 4 spool pins in the front row for sewing, and

rsecond row spool pins are for the standby spools.

Use the rear most spool pin for bobbin winding.

e

Felt rings of two sizes are provided to accommodate

wvarious types of spools of thread and thread cones. Use the large felt rings for large thread cones. For small

thread cones or spools of thread, insert the small felt rings into the large rings.

qSpool pin

wFelt ring (large) e Felt ring (small)

r Small spool of thread

t Spool pin for bobbin winding

 

Setting the thread cone

 

Attach the spool rests on the spool pins.

 

Place the thread cones on the spool pins.

 

Cover the thread cone with the spool net if the thread is

u

shaky or kinky when sewing.

If the net is too long for a spool, fold the net and place it

y

on the spool.

 

y Spool rest

 

u Spool net

i

Setting the spool of thread

Place the spool of thread on the spool pin, with the thread coming out from the left backside.

Attach the spool cap and firmly press it against the spool. i Spool cap

o

NOTE:

To prevent the thread from unraveling, leave the net on the thread cone or hook the thread end into the notch of the spool when it is not in use.

o Notch

10

Page 13
Image 13
Janome MB-4 manual Setting the Thread Cones or Spools of Thread, Setting the thread cone, Setting the spool of thread