Janome MB-4 manual Setting the Fabric in the Embroidery Hoop

			Setting the Fabric in the Embroidery Hoop
z	q		z Attach stabilizer to the wrong side of the fabric.
			Mark the centerlines for pattern placement on the
			right side of the fabric.
			q Fabric
			w Centerlines
			e Stabilizer
	e
x	w		x Place the inner hoop with the template on the
t
y			fabric. Make sure that the arrow marks on the
			hoop and template are facing away from you.
			Align the centerlines on the fabric and
			template.
		r	r Inner hoop
			t Template
			y Arrow mark
	u
c			c Loosen the hoop tightening screw on the outer
			hoop.
	i		u Outer hoop
			i Hoop tightening screw
		o
v			v Hold the inner hoop and fabric together and push
			them into the outer hoop. Make sure to keep the
			centerlines aligned.
			Do not push the setting plates, push the 4 corners
			of the inner hoop
			o Setting plate
b			b Tighten the hoop tightening screw slightly. Pull the
i			edge of the fabric to stretch it drum-tight.
			NOTE:
			Make sure the bottom of the inner hoop is level with
			the outer hoop.

n	i	n Tighten the hoop tightening screw securely.
		t
m		m Remove the template.

22