08 | ON |
09 | OFF |
10 | M |
11 | 8 |
[08]Reminder message ON/OFF
When you press the START/STOP button, a reminder message will appear on the LCD screen. However, you can turn off the reminder.
Press the right arrow button 
to indicate [OFF] to turn off the reminder.
Press the ENTER button to register the new setting or press the upward arrow button
to go to the next setting.
[09]Ignoring short stitches
Very short stitches may cause the thread to break. To avoid this problem, turn on the ignoring short stitches function.
Press the right arrow button 
to indicate [ON]. Press the ENTER button to register the new setting or press the upward arrow button
to go to the next setting.
[10]Setting the trim tail length
Some times you need to adjust the tail length of the thread being trimmed depending on the thickness and type of the thread.
Press the right or left arrow button 
to adjust the trim length.
You can select one of the following options.
S:Short
M:Medium
L:Long
Press the ENTER button to register the new setting or press the upward arrow button 
to go to the next setting.
[11]Setting the thread detector sensitivity
You can adjust the sensitivity of the thread detector by setting stitch count to judge thread breakage.
Press the right or left arrow button 
to adjust the sensitivity. The adjustable range is from 3 to 16.
Press the ENTER button to register the new setting or press the upward arrow button 
to go to the next setting.
59
