04

NO

05

NO

06

600

07

1

[04]Formatting the memory

If the internal memory does not function due to damage to the memory bank, you need to re-enable it by formatting the memory.

Press the right arrow button to indicate [YES]. Press the ENTER button to format the memory. If you do not wish to format, press the left arrow button to change the indication to [NO].

Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

[05]Resetting all to defaults

All the parameters in the My setting mode can be reset to the original values (factory setting).

Press the right arrow button to indicate [YES]. Press the ENTER button to reset the settings to defaults. If you do not wish to format, press the left arrow button to change the indication to [NO]. Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

[06]Maximum sewing speed

The maximum sewing speed can be set from 400 to 800 spm by 100 spm increments.

Press the right or left arrow button to alter the sewing speed.

Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

[07]Thread selection

There are 6 brands of thread to choose from.

Press the right or left arrow button to select the brand number. The color code of the selected brand will be shown in the Ready to sew mode display.

The brand numbers are as follows:

1Janome

2Gütermann Sulky (rayon 40)

3Madeira (polyester 40)

4Mettler (Poly Sheen)

5Robison-Anton (polyester 40)

6Robison-Anton (rayon 409)

Press the ENTER button to register the new setting or press the upward arrow button to go to the next setting.

58

Page 61
Image 61
Janome MB-4 manual Formatting the memory, Resetting all to defaults, Maximum sewing speed, Thread selection