| Removing the bobbin case |
| q |
z | CAUTION: |
| |
| Turn the power switch off before removing the |
| bobbin case. |
| z Open the hook cover toward you. |
| q Hook cover |
x | x Hold and open the latch of the bobbin case. |
Take the bobbin case out from the machine. | |
w | w Latch |
|
Inserting the bobbin
z 
wq
x
zInsert the bobbin into the bobbin case leaving a 2” (5 cm) thread tail as illustrated.
q Bobbin
w Bobbin case
xDraw the thread to slip it into the slit of the bobbin case.
e Slit
| r |
| e |
c | t |
| c Pull the thread to slide it under the tension blade |
|
| ||
|
|
| until the thread comes out from the opening. |
|
|
| r Tension blade |
|
|
| t Opening |
| v | y | v Pass the thread through the pigtail by spiralling the |
|
|
| thread around the pigtail. |
|
|
| y Pigtail |
NOTE:
The bobbin should turn clockwise when the thread is pulled.
17
