,

b n m

.

⁄0

⁄1

⁄22

⁄3

⁄4

r

te q

w

y

u

o

i

!0

bDraw the thread down and pass it through the right hole in the guide plate.

q Right hole in the guide plate

nPass the thread through the eye of the right check spring.

w Eye of the check spring

mPull the thread up and pass it through the second hole from the right.

e Second hole from the right

,Continue to pull the thread up to the right take-up lever. Pass the thread through the eye of the take- up lever.

r Take-up lever

.Draw the thread down and pass it through the third hole from the right in the guide plate.

t Third hole from the right

⁄0Continue to draw the thread down to the lower guide plate and pass the thread through the right hole.

yRight hole in the lower guide plate

⁄1Hold the thread with both hand and slip the thread behind in the right needle bar thread guide.

uNeedle bar thread guide

⁄2Thread the needle with the handy needle threader (refer to the next page).

⁄3Pass the thread through the hole in the presser foot.

Draw the thread up and pinch the thread tail with the holder spring.

iHole in the presser foot o Holder spring

⁄4Pull up the tension release lever to close the tension disks.

!0Tension release lever

20

Page 23
Image 23
Janome MB-4 manual ⁄22