Connecting the Power Supply, Grounding Instructions | Janome MB-4

z

v

Connecting the Power Supply

			CAUTION:
			Turn the power switch off before connecting
			the machine to the power supply.
			z Turn the power switch off.
			q Power switch
		q	x Insert the machine plug into the machine
		q	socket.
			socket.
			w Machine plug
			e Machine socket
		t	c Insert the power supply plug into the
		r	c Insert the power supply plug into the
	x	r	properly grounded outlet.
	x		properly grounded outlet.
		c	r Power supply plug
	e	c	t Wall outlet (grounded)
	w
			v Turn the power switch on.

Grounding Instructions:

This machine is equipped with a grounding cable and plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded. If a properly grounded outlet is not available, contact a qualified electrician to install the properly grounded outlet.

Refer to page II for more instructions.

13

Image 16

Janome MB-4 manual Connecting the Power Supply, Grounding Instructions

Contents

Instruction Book Important Safety Instructions Grounding Instructions Table of Contents Setting UP the Machine Installing the Machine Adjusting the feet Removing the Head StoppersPage Names of Parts Sub control panel RCS unit optional item Standard Accessories Optional RCS unit Standard Accessories Assembling the Spool Stand Setting the thread cone Setting the Thread Cones or Spools of ThreadSetting the spool of thread Installing the Hoop Supporter Installing the RCS Unit optional item Connecting the Power Supply Grounding Instructions Direct PC-Link Needles Bobbin ThreadsStabilizers Winding the Bobbin Removing the bobbin case Inserting the bobbin Inserting the bobbin case Threading the Needle Threading needle No.1 ⁄22 Threading the needle with the needle threader Setting the Fabric in the Embroidery Hoop Setting the Embroidery Hoop Adjusting the Hoop Supporter for Optional Hoops Mode button LCD brightness adjusting dialMachine operating buttons Start/Stop button Y u LCD screen Machine Settings Stitch count settingColor section layer setting Needle bar number setting N1253 N2224 Starting to Embroider HM1 ? M1 02010 02/13 Removing the Hoop Adjusting the Thread Tension Adjusting the needle thread tensionAdjusting the bobbin thread tension Tension is too tight Checking the needle Replacing the NeedleReplacing the needle Basic Operation of the Optional RCS Unit Function keys Menu keyFile open key SET key On-screen Help Movie Disconnecting the RCS Unit Advanced Operation with the Optional RCS Unit Selecting the Embroidery Patterns Selecting the built-in designs Color list option Function keys circle keysAutomatic color assignment Manual color assignment Monogramming Function keys Font selection Lettering orientationLetter size Letter case Entering the characters Saving the monogram Correcting the text To delete a character To insert a character Horizontal orientation Placement of monogrammingVertical orientation Multi-color monogramming Editing Editing Functions Selecting the hoopMoving the pattern Resizing the pattern Deleting the pattern Rotating the patternSaving the file Duplicating the pattern Flipping the pattern Monogramming in an arc Customizing the color setting To customize the colors of the pattern image Combining the Patterns and Lettering ⁄2 Edit Bright Blue Trac Outline M2126X110mm Customizing the Setting with the Sub Control Panel Eco mode settingBuzzer sound control Machine ID number Resetting all to defaults Formatting the memoryMaximum sewing speed Thread selection Setting the trim tail length Setting the thread detector sensitivityReminder message ON/OFF Ignoring short stitches Jump thread trimming ON/OFF Jump thread trimming threshold LCD brightness adjustment Customizing the Settings with the Optional RCS UnitInch/mm option Screen saver Touch screen calibration Machine ID and name Yes ⁄2Maximum sewing speed ⁄1Grid size⁄3Hoop selection for monogramming ⁄4Selecting the thread brand ⁄5Screen color options ⁄7Reserving the color for the needle bar ⁄6Reminder message ON/OFF⁄8Ignoring short stitches ⁄9Setting the trim tail length ¤0Setting the thread detector sensitivity¤2Setting the number of jumps for trimming ¤1Jump thread trimming ON/OFF ¤3Language selection File Management Saving the Pattern as a File Creating a new folder Opening a file Deleting the folder Deleting the file PC Design Cards Inserting the PC Design cardEjecting the PC Design card Opening the embroidery pattern from the PC Design card USB Memory Opening the embroidery pattern from the USB memory CD-ROM Drive Opening the embroidery pattern from the CD-ROM Cleaning the Hook Cleaning the Bobbin Case Cleaning the Auto Thread Cutter Mechanism Oiling Audible Signals Error MessagesAudible signal Buzzer sounds when Troubleshooting Problem Cause Reference Troubleshooting