b

u

n

o

y

H:M1 ?

M1 02010 02/13 2

i

!0

bPress the START/STOP button, the LCD screen will show the reminder asking you to confirm the hoop type to be used.

y START/STOP button u Reminder display

NOTE:

If you press the START/STOP button when the tension release lever is in the open position, a warning sign [W:03] will appear.

Pull the tension release lever up to close the tension disk.

Check the hoop size and press the START/ STOP button again to sew a few stitches.

nPress the START/STOP button to stop the machine.

Trim the thread at the beginning.

Then, press the START/STOP button again. The machine will sew up to the fourth color and stop automatically.

Re-thread each needle with the next color and press the START/STOP button to continue sewing.

If the thread breaks or runs out while stitching, the machine will automatically stop and the hoop will go back to the position where the thread broke or ran out.

However, you can fine-tune the restarting position by moving the hoop.

Press the ENTER button to select the stitch count setting.

iENTER button

Press the upward arrow button to move the hoop forward 10 stitches.

oUpward arrow button

Press the downward arrow button to move the hoop backward 10 stitches.

!0Downward arrow button

28

Page 31
Image 31
Janome MB-4 manual HM1 ? M1 02010 02/13