￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 Press the ￿ buttons to choose AUTO

You can transmit to the latest Programme numbers (PR) data

PROGRAM. Then press the ￿ button.

A COUNTRY menu appears as a sub-menu of the

to the VCR with the T-V LINK function.

AUTO PROGRAM function.

 

Caution:

Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.

Only when the T-V LINK menu is being displayed, this oper- ation is enabled.

1Turn on the VCR.

2Press the ￿ button.

The data transmission begins.

The T-V LINK menu disappears once the data transmis- sion ends.

When the T-V LINK menu is changed over to another menu:

The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.

Note:

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, ensure the following three items are cor-

rect; then press the ￿button to retry data transmis- sion.

Has the T-V LINK compatible VCR been connect- ed to the EXT-2 terminal?

Has the VCR power been turned on?

Does the SCART cable that is connected to the EXT-2 terminal to T-V LINK compatible VCR have all proper connections?

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿

After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.

When registering the TV channels for French broadcast stations (SECAM-L system), perform this operation to change the country.

1Display the INSTALL menu.

When the EDIT menu is currently being dis- played:

Press the ￿(Information) to return to the INSTALL menu.

3Press the ￿ and the ￿ buttons to choose a country.

4Press the ￿ button to complete the set- ting.

The menu disappears.

To return to the INSTALL menu from the COUNTRY menu:

Press the ￿(Information) button instead of the ￿ button.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿!￿￿"#￿￿

$%￿&￿￿￿￿

When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the Decoder power.

2Display the TV channel capable of being unscrambled with the Decoder on the TV.

Even if the Decoder is functioning, a scrambled picture appears at this time.

3Press the ￿ button to display the MENU.

The MENU (main menu) appears.

4Press the ￿ buttons to choose FEA- TURES. Then press the ￿ button.

The FEATURES menu appears.

5Press the ￿ buttons to choose DECOD- ER (EXT-2) . Then press the ￿buttons to choose ON.

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the ￿buttons to choose OFF.

￿￿

Page 29
Image 29
JVC AV-32WFT1EP, AV-28WFT1EP PROGRAM. Then press the button, Turn on the VCR Press the button, Display the Install menu