JVC AV-32WFT1EP, AV-28WFT1EP manual Press the yellow button to delete the TV channel

INSTALL

￿￿￿￿￿￿

1 Press the ￿ buttons to choose a TV channel.

Every time you press the ￿buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) ap- pears on the screen.

2Press the yellow button to delete the TV channel.

The TV channel is deleted from the Programme num- bers (PR) list.

￿￿￿￿￿￿

Preparation:

∙As long as you register the TV channel (SECAM-L system) from a French station, be sure to set the COUNTRY setting to FRANCE. If the COUNTRY setting is not FRANCE, follow the description “Changing the COUNTRY setting” on page

28to change the COUNTRY setting to FRANCE, then start the MANUAL function.

1Press the ￿ buttons to choose a Pro- gramme number (PR) to which you want to register a new TV channel.

2Press the blue button to activate the MAN- UAL function.

At the right side following the CH/CC number, the SYS- TEM (broadcasting system) of the TV channel appears.

To cancel the MANUAL function:

Press the ￿(Information) button.

3Press the ￿ button to choose the SYSTEM (broadcasting system) for a TV channel you want to register.

TV channel (SECAM-L system) from a French station:

Set the SYSTEM to “L”. If it is set to one other than “L”, you cannot receive the TV channel of the SECAM-L sys- tem.

Other TV channels:

If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, it results in the fact that you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM again correctly so that no problem arises.

4Press the green or red button to search for

a TV channel.

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

5Press the green or red button repeatedly until the TV channel you want appears.

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV chan- nel.

If you cannot hear the normal sound even when the picture of the TV channel appears normal- ly:

The SYSTEM setting is wrong. Press the ￿button and choose a SYSTEM that has normal sound.

6Press the ￿ button and register the TV

channel to a Programme number (PR).

The normal EDIT menu is resumed.

￿￿