JVC AV-32WFT1EP, AV-28WFT1EP manual Additional Menu Operations

ADDITIONAL MENU OPERATIONS

6Press the ￿ button to complete the set- ting.

The T-V LINK menu appears.

7Follow the operating procedure “Down- loading the data to VCR” on page 28 to transmit the Programme number (PR) data to the VCR.

8If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 7.

Note:

∙If for some reason the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

■'￿￿￿￿￿￿￿￿￿￿￿'￿￿￿(￿￿￿$%￿&￿￿￿￿

Turn off the SPEAKER function so that TV speakers will not issue any sound.

1.Press the ￿ button to display the MENU (main menu).

2.Press the ￿ buttons to choose SOUND SETTING. Then press the ￿ button to dis- play the SOUND SETTING menu.

The SOUND SETTING menu appears.

3.Press the ￿ buttons to choose SPEAK- ER. Then press the ￿buttons to choose OFF.

ENGLISH

−Has the Decoder been connected to the VCR properly according to the VCR and Decoder In- struction Manuals?

−Has the Decoder power been turned on?

−Can the TV channel be unscrambled with a De- coder?

−Is it necessary to change the VCR settings in or- der to connect the Decoder? Confirm that the VCR is set properly by rechecking the VCR In- struction Manual.

The sound from the TV speakers are cut.

4.Press the ￿ button to complete the set- tings.

The menu disappears.

Note:

∙The ￿ buttons of the TV remote control and the ￿ (volume) buttons at the front panel of your TV set can be used to control the volume of each speaker simultane- ously.

∙Setting the volume of the amplifier too high may damage the front speakers.

￿￿