JVC AV-32WFT1EP, AV-28WFT1EP manual Vcr

￿￿￿￿￿￿￿￿￿￿￿

■￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

If connecting a VCR, follow A → B → C → D.

If not connecting a VCR, follow 1 → 2.

*1: To operate T-V LINK functions, a T-V LINK compatible VCR must be connected to the EXT-2 terminal on the TV. For details about T-V LINK functions, see “T-V LINK FUNCTIONS” on page 5.

Note:

∙For further details, refer to the manuals provided with the devices to be connected.

∙The connecting cables are not provided.

∙A video can be viewed from the VCR without performing C. For details, refer to your VCR instruction manual.

∙To connect additional external devices, please see “AD- DITIONAL PREPARATION” on page 30.

∙To connect speakers and amplifier, please see “Con- necting Speakers/Amplifier” on page 31.

∙When a decoder is connected to a T-V LINK compatible VCR, set the DECODER (EXT-2) function to ON. For de- tails, see “Using the DECODER (EXT-2) function” on page 28. Otherwise, you will not be able to view scram- bled channels.

AC Outlet

(AC 220 - 240 V,

50 Hz)

VHF/UHF Aerial

Power

Cord

			75-ohm
*1			Coaxial
	S	S	Cable
	EXT-2	EXT-3

L

R

EXT-1

AUDIO OUT

Aerial

Plug

21-pin SCART Cable

Aerial Plug

75-ohm Coaxial

Cable

VCR

To Aerial

Input

Aerial Plug

To Aerial

AV IN/OUT

Terminal

Output

■￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Use two AAA/R03 dry cell batteries.

Insert the batteries from the ￿end, making sure the ￿and ￿ polarities are correct.

To open the battery compartment, slide the door downwards and lift off. Replace the door by sliding it upwards until it is se- cure.

Note:

∙ Follow the warnings printed on the batteries.

∙Battery life is about six months to one year, depending on your frequency of use.

∙If the remote control does not work properly, replace the batteries.

∙The batteries we supply are only for setting up and test- ing your TV, please replace them as soon as necessary.

∙Always use good quality batteries.

￿