JVC AV-32WFT1EP, AV-28WFT1EP manual Press the blue button to start the Auto Program function

￿￿￿￿￿￿￿

3 Press the blue button to start the AUTO PROGRAM function.

The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR).

To display the INSTALL menu:

1 Press the ￿ button to display MENU (main menu).

2 Press the￿button to choose the INSTALL		To cancel the AUTO PROGRAM function:
	menu. Then press the ￿button.	Press the ￿button.
■ ￿￿￿￿￿￿￿￿		4 After the TV channels have been regis-
You can choose the language you want to use for the on-		tered in the Programme numbers (PR), the
		EDIT menu appears.
screen display from the language list in a menu.
1 Press the ￿ buttons to choose LAN-		You can proceed to edit the Programme numbers (PR)
		using the EDIT/MANUAL function. For details, see “ED-
GUAGE. Then press the ￿ button.		IT/MANUAL” on page 24.
A sub-menu of the LANGUAGE function appears.		When not using the EDIT/MANUAL function:
		If you do not need to use the EDIT/MANUAL function, go
		to the next step.

ENGLISH

5Press the ￿button to display the T-V LINK menu.

2Press the ￿ buttons to choose a lan- guage.

3Press the ￿ button to complete the set- ting.

6Operate the T-V LINK menu according to the type of VCR connected to the EXT-2 terminal.

The menu disappears.

■￿￿￿￿￿￿￿￿￿￿￿￿

You can automatically register the TV channels which can be received well at your residence in the TV’s Programme num- bers (PR) by performing the following.

1 Press the ￿ buttons to choose AUTO PROGRAM. Then press the ￿ button.

The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function.

2Press the ￿ and °/5 buttons to choose the country where you are now located.

When a T-V LINK compatible VCR is not con- nected:

Press the ￿button to exit the T-V LINK menu.

The T-V LINK menu disappears, and all the settings are completed.

When a T-V LINK compatible VCR is connected:

Follow the operating procedure “Downloading the data to VCR” on page 28 to transmit the Programme number (PR) data to the VCR.

Note:

∙When your TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Pro- gramme number (PR) in which the TV channel has been registered.

∙If a TV channel you want to view is not set to a Pro- gramme number (PR), manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 24.

∙The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV) manually set it using the MANUAL function. For

details, see “EDIT/MANUAL” on page 24. ￿￿