JVC DM-NC40 Step, Step 5 Mode Setting, Step 6 Detailed setup, Step 4 Initial Settings, Step 2 PC Network Settings, About the ISMA Server Mode

Preparation Flow

Perform settings using the steps shown below.

Step 1 Connection/Installation

•Connect cables to the back of the unit.

• For recording, insert a CF card

Page 13 ~

•When completed, turn on the power.

Step 2 PC Network Settings

	• Network settings for the unit have been performed at the time of shipment.	Page 20 ~
	First, perform network settings for the connecting PC.	Page 20 ~
	First, perform network settings for the connecting PC.

Step 3 Launching the Web Browser

	• Launch the Web browser and input the IP address of the unit (Factory setting	Page 24 ~
	of IP address, 10.0.0.1, is enabled if there is no DHCP server in the LAN.)	Page 24 ~

•Login as the administrator. Input the user name and password for administrator. <Settings hereafter will be performed using the Web browser.>

Step 4 Initial Settings

•	Change IP address of the unit according to the network environment.
	You need reconnect Web browser with new IP address after changed.	Page 27 ~
•	Set the date and time to the unit.

Step 5 Mode Setting

	• Select mode of the unit according to the application.	Page 29 ~
	( See “1-1 Connection Examples”, page 13)	Page 29 ~
	( See “1-1 Connection Examples”, page 13)

Step 6 Detailed setup

•Perform detailed setup for each application.

About the ISMA Server Mode

•ISMA-compliant player is available with the ISMA Server mode.

Page 30 ~

For details, please consult the person in charge of professional equipment at your nearest JVC-authorized service agent.