4. Set the IP address
1 Select “Use the following IP address”.
2Set “IP address”. (For use at default setting without DHCP server, enter 10.0.0.100)
Memo
• Always take a memo of the original IP address before making changes.
• Do not use the same IP addresses within a LAN.
3 Enter appropriate values for “Subnet mask”. If unknown, ask to your network administrator. (For compatibility with default settings use 255.0.0.0)
4 If there is a “Default gateway”, enter the IP address. (For example, 10.0.0.254)
5 Click 
.
5. Click 
in the “Local Area Connection Properties” dialog box” screen
1 Click 
.
Preparations
21