Step 3 Launching the Web Browser (Continued)

3-3 Launching the Browser

When the IP address of DM-NC40 is specified in the Web browser and login as an administrator

is performed, the initial setup (STATUS) screen is displayed.

1. Launch the Web browser

1 Enter the IP address of the unit. (Factory setting, 10.0.0.1, is available when there is no DHCP server.)

2 Click “Go”.

Memo

Direct specification of the IP address may not be possible when a proxy server is used for Internet access. In this case, disable the proxy setting.

2. Enter the user name and password (Login as an administrator)

1 Enter user name of administrator. Factory setting is “admin”.

2 Enter password of administrator. Factory setting is “dm-nc40”.

3 Click .

To login by different access level, close previous browser and reconnect or open new browser and connect.

3. Network Codec screen (STATUS) is displayed

Click “Detailed Setup” to display submenus.

26