Operating the ISMA Server System

To play the stream from ISMA Server mode, ISMA-complaint player is required.

There are 2 types of streaming: unicast that is available only for one client, and multicast that is available for multiple clients. Operation of player differs depending on the streaming type.

Server side

Player side

ENCODE DECODE

HOLD IN 1 IN 2

POWER

CF PLAY STOP

HOLD SELECT PinP

Network

Number display

Perform the following steps on PC.

Operations

For unicast

1. Set the IP address of the PC for connection with DM-NC40.

See “Setting the IP Address”, pages 20 and 22

Memo

Make sure the same IP addresses have not been set within the same network.

2. Launch the ISMA-compliant player.

3. Select “Open URL”

Enter:

“rtsp://*.*.*.*/Iive.mp4”

(*.*.*.* is the IP address of DM-NC40)

For multicast

1. Set the IP address of the PC for connection

with DM-NC40.

 See “Setting the IP Address”, pages 20 and 22.

2.Launch the Web browser

In Network Setup of the unit ( page 30), set the Multicast stream start button to “ON”.

The multicast stream is transmitted from the DM- NC40.

Memo

When transmitting multicast streams from multiple DM-NC40 units, make sure the same multicast IP addresses or port numbers are not used.

 

 

 

3.

Receive multicast streams with an ISMA-

4.

 

To stop, close the player by clicking on the

compliant player

 

 

top right of the window.

For receiving multicast stream, contact the nearest

 

 

 

 

JVC-authorized service agent.

Memo

•UP to 5 players can be connected simulta- neously for unicast. (Number of players will be counted as 2 even if connections from 2 play- ers are from the same PC.)

Memo

Number display during transmission

Number of unicast clients(0-5)

0:Multicast transmission not in progress

1:Multicast transmission in progress

47