Operating the Monitor System

For use as a Monitor system, the DM-NC40 connected to the camera side is set to the

Camera side

Camera mode and the DM-NC40 on the monitoring side is set to the Monitor mode.

Camera side

Monitoring side

 

ENCODE

DECODE

HOLD

IN 1

IN 2

POWER

CF

PLAY

STOP

HOLD

SELECT

PinP

 

Number display

1.

<Camera side> Camera mode

1. Set the power to ON.

(Off)

Network

 

ENCODE

DECODE HOLD IN 1 IN 2 POWER

CF

PLAY

STOP HOLD SELECT PinP

Number display 2.

 

3.

1.

<Monitoring side> Monitor mode

1. Set the power to ON.

(Off)

The number display circles, IP address is displayed as shown on page 48, and then turns off when ready.

The number display circles, IP address is displayed as shown on page 48, and then turns off when ready.

The sent number will flash.

4. When connection is established:

The display will change to a

constant display.

5. Press the PinP button

Video IN 1 and 2 videos will be displayed simultaneously.

44

2. Enter the camera-side number

•Use ￿ and ￿ to select the digit to input.

•Use ￿ and ￿ to increment/decrement the number of the selected digit (0 ~9).

Memo

•Pressing ￿ or ￿ first will display the number of the previous connection.

3.Press the PLAY button.

The entered number will flash.

4. When connection is established:

• The display will change to a constant display and the video of the camera selected using the SELECT button is displayed.

• Pressing the SELECT button each time switches the video between VIDEO IN 1 and VIDEO IN 2.

5. Press the PinP button

Video IN 1 and 2 videos will be displayed simultaneously.