Step 1 Connection/Installation (Continued)
1-1 Connection Examples(Continued)
(2) Remote monitoring system
Bidirectional audio conference is available. The units can reconnect automatically by power on after power failures. (CF card recording can only be performed on the camera side. Recording on the monitoring side is not available.)
Camera 1
L H | LEVEL |
Av Pk | ALC |
Camera 2
L H | LEVEL |
Av Pk | ALC |
Alarm signal
Speaker
ALARM
INPUT 1~4
AUDIO OUT
ALARM
AUDIO
IN OUT
AC IN
L
VIDEOIN | VIDEOIN |
12
| SERIAL 1 |
| SERIAL 2 |
RS485 | RS232C | SERVICE CONTROL | |
VIDEO | VIDEO | VIDEO | |
OUT | IN 1 | IN 2 |
|
| LOOP | LOOP | |
| THRU | THRU |
JPEG images can be monitored ( Page 46)
R
RESERVED | OPEN | OPEN |
Microphone Amplifier
Camera mode
( Page 29) | CF card | Network |
|
|
Microphone
( Page 17) |
|
|
|
|
| Amplifier |
| AUDIO IN | AUDIO OUT |
| A. IN | ||
|
|
|
|
|
| VIDEO |
|
| ALARM |
| SERIAL 1 |
| SERIAL 2 |
|
|
|
|
|
| OUT |
|
|
| RS485 | RS232C | SERVICE CONTROL |
|
|
| AUDIO | VIDEO | VIDEO | VIDEO |
|
| IN | OUT | OUT | IN 1 | IN 2 | V. IN |
| AC IN |
|
| LOOP | LOOP | |
| L |
|
|
|
|
|
Monitor mode |
|
|
| THRU | THRU | |
R |
|
|
|
|
| |
|
| RESERVED |
| OPEN | OPEN | |
Monitor
( Page 29)
Memo
•Make sure to set each IP address differently.
•Use of a dedicated network is recommended.
•Use
•Use the L channel of AUDIO IN. R channel is not available in this mode.
•Automatic recovery works by power on when working unit is turned off.
•When connection is resumed by the automatic recovery feature, flashing of the connection number display may be longer than usual or the video and audio output may take some time after the display turns on. How- ever, this is not a malfunction of the unit.
•Video input is to be inputted in VIDEO IN 1 or VIDEO IN 2 on the camera side.
•The echo canceller is set to OFF when shipped. To use echo canceller for bidirectional audio communication, see page 53.
14