Optional settings (set as needed)
Item | Content | Default value |
Host Name | A name for distinguishing the unit connected to a network is set. | |
| Allowed characters are alphanumerical characters, hyphen |
|
| period (.). |
|
| Maximum number of characters allowed is 64. |
|
Domain Name | Names can be set individually for a system connected with multiple | network |
|
| |
| Allowed characters are alphanumerical characters, hyphen |
|
| period (.). |
|
| Maximum number of characters allowed is 64. |
|
DNS Server | The address of the DNS server can be set. | 0.0.0.0 |
NTP Server | Set when synchronizing the time of multiple | 0.0.0.0 |
NTP Refresh Interval | Set interval for referencing current time to the NTP server. | 1h (1 hour) |
| [Variable: 5min, 10min, 30min, 1h, 2h, 4h, 8h, 12h, 1 day] |
|
IP Broadcast | Set according to the used broadcast protocol. | All 1 |
| All 1: Normally, select this setting. |
|
| All 0 (Old Protocol): Select this setting when other devices are |
|
| supporting old broadcast protocol. |
|
RTSP Server | Set whether to enable the RTSP server feature. | Enabled |
| Enabled: Enables the feature. (Connection from an RTSP client is allowed.) |
|
| Disabled: Disables the feature. |
|
Acceptance | How to accept communication request from other units. This setting is | KEY |
| valid in teleconference mode and Monitor mode. |
|
| Auto: Accepting connection automatically. |
|
| OFF: Refusing connection. |
|
| KEY: Accepting by PLAY button on the unit. |
|
Multicast | Multicast streaming is controlled. | STOP |
| START: Multicast transmission is started when the button is clicked. |
|
| The START button is yellow during Multicasting. |
|
| STOP: Multicast transmission is stopped when the button is clicked. |
|
| The STOP button is yellow when Multicast stream is not transmitted. |
|
Multicast Address | The multicast destination IP address is set. | 225.0.1.1 |
| When the START button of Multicast is clicked, multicast stream is sent |
|
| to this IP address. |
|
Memo
•Make sure setting different IP multicast addresses to units when multiple multicast streams are used. Select the address from “225.0.1.1” to “225.127.255.254”.
•To send multicast stream, default gateway setting is required even if there is no default gateway. In this case, set an IP address that is not used in the network as default gateway address.
Multicast Port for | The multicast destination port number is set. |
|
| |
Sending | When the START button of Multicast is clicked, multicast stream is sent |
|
| |
|
| to this port number. Only even port numbers are allowed. |
|
|
| For Audio | Set the port number for audio. (Setting range: 2 ~ 65534) | 50000 | |
| For Video | Set the port number for video. (Setting range: 2 ~ 65534) | 50002 | |
Unicast Port for | The destination port number of unicast stream to receive by this unit is |
|
| |
Recieving | displayed. |
|
| |
|
| |||
| For Audio | The port number for audio is displayed. | 49200 | |
| For Video | The port number for video is displayed. | 49300 | |
API Port | The port number for API control of | 23 |
| |
Pass Through Port | The port number used by the | 49152 | ||
for Serial 1 | displayed. |
|
| |
Pass Through Port | The port number used by the | 49153 | ||
for Serial 2 | displayed. |
|
|
Preparations
31