Operating of FTP

Image files can be transferred from CF card in DM-NC40 to PC by FTP. Use FTP client installed PC.

1. From the command prompt of PC, type “ftp” to login. Default settings of DM-NC40, 10.0.0.1 as IP address, OPERATOR as user, and dm-nc40 as password, are used in following steps.

1 Enter “10.0.0.1” (IP address of the unit) after “ftp” and press the Enter key.

2 Enter “OPERATOR” for User and press the Enter key.

3 Enter “dm-nc40” for Password and press the Enter key. (Password will not be displayed)

Operations

2. Type “ls” to list image files or directories

4 Enter “ls” and press the Enter key.

5 Directories at root directory are shown. (“manual” is directory including image files recorded by panel operation)

Each directory contains 2 directories.

Jpeg-1: Image file directory of VIDEO IN1

Jpeg-2: Image file directory of VIDEO IN2

Each image file is saved using the file name shown below in jpeg-1 or jpeg-2 directories.

YYMMDDHHmmss**.jpg

YY:last 2 digits of year, MM: month (01 ~ 12), DD: date (1 ~ 31), HH: hour (00 ~ 23), mm: minute (00 ~ 59), ss: second (00 ~ 59), **: running number within the second value (00, 01, 02)

However, running numbers at the second of the start are 70, 71 and 72 to show the beginning. Running numbers at the second of the end are 80-, 81 and 82 to show the last. Running numbers at the second of alarm input or manual start are 90, 91 and 92 to show the timing.

Example: Recorded files at 12:34:56 on April 1, 2003

File names will be:

03040112345600.jpg

 

03040112345601.jpg

 

03040112345602.jpg

 

:

If there is another alarm during previous recording, 3 files with running numbers 90 ~ 92 are recorded to show the alarm timing.

(Example) 03040112345690.jpg 03040112345691.jpg 03040112345692.jpg

51