JVC DM-NC40 6-2ENCODE PARAMETERS screen

Current setting of bitrate is displayed.

Step 6 Detailed Setup (Continued)

6-2 ENCODE PARAMETERS screen

Encoding related settings can be performed on the ENCODE PARAMETERS screen. Click Encode Parameters on the left of the Network Codec screen to display the ENCODE PARAMETERS screen.

Select the screen

Memo

1The bitrate is selected by directly clicking the select bar.

2 Fine adjustments are made using the

and buttons.

Bitrate being changed by adjust buttons or clicking is displayed.

Setting is selected from the pull-down menu.

Click to confirm settings.

•For teleconference system or remote monitoring system, all units need to have same settings of Video Frame Rate and Video Frame Size.

•The bitrate is average value when inputting standard video. Real bitrate can be higher/lower than the set value depending on the input video.

Item	Content	Default value
Video Frame Rate	The video frame rate is set.	High
	[Variable: High, Mid, Low]
Video Frame Size	The video frame size is set.	352240
	[Variable: 352240, 320240, 176120, 160120]
JPEG Size	The JPEG frame size is set.	704480
	[Variable: 704480, 640480]
Compression Format	The compression format is set.
	[Variable: ISMA(SP), ISMA(ASP), MPEG-4+G.726]
	Memo
	ISMA (SP) and ISMA (ASP) are available only in the ISAM
	Server mode.
	SP: Simple Profile, ASP: Advanced Simple Profile of MPEG-
	4 visual

JPEG	Selects the input signal for recording to the CF card when there	Disabled
	is input of an alarm signal or when the CF button is pressed.
	[Variable: Video In 1, Video In 2, Disabled]
	Setting is available only in the Camera mode.

•When the encode parameters are changed during communication with other DM-NC40, the play- back can freeze for a while. This is a characteristic of this unit and is not a malfunction.

•When the encode parameters are changed during streaming in the ISMA Server mode, playback on ISMA compliant player can be damaged, and restart of the player may be required.