JVC DM-NC40 2-1Setting the IP Address of the PC (For Windows XP)

Step 2 PC Network Setup

2-1 Setting the IP Address of the PC (For Windows XP)

When connection and installation are completed, the IP address of the PC controlling the unit is set.

For Windows XP, perform the setting using the steps shown below. (For Windows 2000,  see

page 22)

1. Click

•Right click “My Network” and select .

2. Select the network of the PC that will be used for Web browser operations

•Right click and select .

Confirm that the checkbox is selected.

Memo

If “Client for Microsoft Network” and “Internet Protocol(TCP/IP)” are not displayed, perform “Install

(N)...”.

3. Select “Internet Protocol (TCP/IP)” and click

1 Select “Internet Protocol (TCP/IP)”.

2 Click .

20