Step 5 Mode Setup

5-1 Setting in the MODE SETUP screen (Be sure to perform)

Select mode of the unit according to the system of use.

1. Click Mode Setup in the Network Codec screen

•The MODE SETUP screen is displayed.

 

 

 

 

 

 

1 Select the mode.

 

 

 

 

 

 

 

 

 

 

 

 

(Factory setting: CAMERA

 

 

 

 

 

 

mode)

 

 

 

 

 

 

2 Click “Initialize to Preset Values”

 

 

 

 

 

 

 

 

 

 

 

 

to reset to the initial values of the

 

 

 

 

 

 

 

 

 

 

 

 

mode selected in 1.

 

 

 

 

 

 

Memo

 

 

 

 

 

 

When clicking this button, the

 

 

 

 

 

 

 

 

 

 

 

 

HOLD display lamp will turn on and

 

 

 

 

 

 

panel operations will be locked.

 

 

 

 

 

 

3 Click “Delete User Mode” to

 

 

 

 

 

 

 

 

 

 

 

 

delete the user mode.

 

 

 

 

 

 

4 Click “Save User Mode” to

 

 

 

 

 

 

Click “Detailed Setup” to display

 

 

 

register the current settings as

submenus.

 

 

 

the user mode.

Select the mode according to the system of use.

Mode

System of use

Camera

Camera side of remote monitoring system ( see page 14)

Monitor

Monitoring side of remote monitoring system ( see page 14)

Teleconference

Teleconference system ( see page 13)

ISMA Server

Streaming system ( see page 15)

User Mode

Values changed in “Step 6 Detailed Setup” are saved.

 

Name of the mode will be “User_Mode_Camera”, etc. It means user defined mode

 

changed from Camera mode.

 

 

*The following screen appears on the Browser after performing changes, and the number display of the unit will show a circling display.

and

 

 

 

are displayed

 

 

 

 

 

Memo

•When the mode is changed, the unit will restart and all settings will return to their initial values of each mode.

•If the current mode is “User Mode”, “User Mode” can not be deleted even when clicking “Delete User Mode”. Do not click “Delete User Mode” during “User Mode”.

•Only one “User Mode” can be saved.

Cautions concerning setting changes

• Settings can not be changed when the unit is communicating with other units. Warning page is displayed on Web browser if you try to chang settings during communication.

• In such case, stop all communications with other units.

• To check current communications, refer to “Telnet Settings” on page 54 and execute the “stat” command.

29

Preparations