Indications | Selectable settings, [reference page] | |
DEMO | DEMO ON : [Initial]; Display demonstration will be activated | |
Display |
| automatically if no operation is done for about 20 seconds, |
demonstration |
| [6]. |
| DEMO OFF : Cancels. | |
|
|
|
CLOCK H | 1 – 12, [6] |
|
Hour adjustment | [Initial: 1 (1:00)] | |
|
|
|
CLOCK M | 00 – 59, [6] |
|
Minute adjustment | [Initial: 00 (1:00)] | |
|
|
|
DIMMER | ON | : Dims the display illumination of this unit. |
Dimmer | OFF | : [Initial]; Cancels. |
|
|
|
SCROLL*6 | ONCE | : [Initial]; Scrolls the disc information once. |
Scroll | AUTO | : Repeats scrolling |
| OFF | : Cancels. |
| • Pressing DISP for more than one second can scroll the display regardless | |
| of the setting. | |
|
|
|
WOOFER*7 | LOW | : Frequencies lower than 90 Hz are sent to the subwoofer. |
Subwoofer cutoff | MID | : [Initial]; Frequencies lower than 135 Hz are sent to the |
frequency |
| subwoofer. |
| HIGH | : Frequencies lower than 180 Hz are sent to the subwoofer. |
|
| |
EXT IN*8 | CHANGER : [Initial]; To use a JVC CD changer, [8], an Apple iPod or a | |
External input |
| JVC D. player, [14]. |
| EXT IN | : To use any other external component than the above, [16]. |
|
| |
L/O MODE | When connecting the amplifier or subwoofer, set this correctly. | |
Line output mode | REAR | : [Initial]; Select if the REAR LINE OUT terminals are used |
|
| for connecting the speakers through an external amplifier. |
| WOOFER | : Select if the REAR LINE OUT terminals are used for |
|
| connecting a subwoofer through an external amplifier. |
|
|
|
TAG DISP | TAG ON | : [Initial]; Shows the Tag information while playing MP3/ |
Tag display |
| WMA tracks, [10]. |
| TAG OFF | : Cancels. |
|
| |
AMP GAIN | You can change the maximum volume level of this unit. | |
Amplifier gain | LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of | |
control |
| the speaker is less than 50 W to prevent them from being |
|
| damaged.) |
| HIGH PWR : [Initial]; VOL 00 – VOL 50 | |
|
|
|
*6 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *7 Displayed only when “L/O MODE” is set to “WOOFER.”
*8 Displayed only when one of the following sources is
13