INSTALLATION | |||
The following illustration shows a typical installation. If you have any questions or require information |
|
| JVC |
regarding installation kits, consult your JVC car audio dealer or a company supplying kits. |
|
|
|
• If you are not sure how to install this unit correctly, have it installed by a qualified technician. |
|
Do the required electrical connections.
Bend the appropriate tabs to hold the sleeve firmly in place.
*1 When you stand the unit, be careful not to damage the fuse on the rear.
*1
Removing the unit
Before removing the unit, release the rear section.
Insert the two handles, then pull them as illustrated so that the unit can be removed.
Fire wall | Stay (option) |
In a Toyota car for example, first remove the car radio and install the unit in its place.
Dashboard
Screw (option)
(TOYOTA)
Flat type screws (M5 ⋅ 8 mm)*2 (M5 ⋅ 8 mm)*2
Bracket*2
*2
Bracket*2
*2
*2 Not supplied for this unit.
*2
Flat type screws (M5 ⋅ 8 mm)*2 (M5 ⋅ 8 mm)*2
Install the unit at an angle of less than 30˚.
30˚
Note | : When installing the unit on the mounting bracket, make sure to use the 8 | |
|
| used, they could damage the unit. |
! | 8 mm |
TROUBLESHOOTING
•The fuse blows.
*Are the red and black leads connected correctly?
•Power cannot be turned on. * Is the yellow lead connected?
•No sound from the speakers.
*Is the speaker output lead
•Sound is distorted.
*Is the speaker output lead grounded?
*Are the
•Noise interfere with sounds.
*Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
•This unit becomes hot.
*Is the speaker output lead grounded?
*Are the
•This unit does not work at all. * Have you reset your unit?
• |
|
|
|
|
* |
|
|
| % |
• |
|
|
|
|
* |
| % |
|
|
• |
|
|
|
|
* |
|
| % |
|
• |
|
|
|
|
* |
|
| % |
|
* | (L) | (R) | % | |
• |
|
|
|
|
* |
|
|
| % |
• |
|
|
|
|
* |
|
| % |
|
* | (L) | (R) | % | |
• |
|
|
|
|
* |
| % |
|
|
2