ENGLISH
Other external component operations
You can connect an external component to the CD changer jack on the rear using the Line Input
•For connection, see Installation/Connection Manual (separate volume).
For listening to the satellite radio, iPod, or D. player, refer to pages 15 – 19.
~
If “EXT IN” does not appear, see page 14 and select the external input (“EXT IN”).
ŸTurn on the connected component and start playing the source.!Adjust the volume.
More about this unit
Basic operations Turning on the power•By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
Turning off the power•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
Tuner operationsStoring stations in memory
•During SSM search...
–All previously stored stations are erased and stations are stored newly.
–Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).
–When SSM is over, the station stored in No. 1 will be automatically tuned in.
•When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.
⁄Adjust the sound as you want. (See pages 11 and 12.)
To check the other information while listening to an external component
Clock ÔEXT IN
Disc operations
Caution for DualDisc playback•The
General
•This unit has been designed to reproduce CDs/CD Texts, and
•When a disc had been loaded, selecting “DISC” for the playback source starts disc play.
20