!Start searching for your favorite programme.

If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

Storing your favorite programme

types

You can store six favorite programme types.

Preset programme types in the number buttons (1 to 6):

1Select a PTY code (see page 8).

2Select the preset number (1 – 6) you want to store into.

Ex.: When “ROCK M” is selected

3Repeat steps 1 and 2 to store other PTY codes into other preset numbers.

4Finish the procedure.

 

Using the standby receptions

 

 

TA Standby Reception

ENGLISH

 

 

 

TA Standby Reception allows the unit to switch

 

temporarily to Traffic Announcement (TA)

 

from any source other than AM.

 

The volume changes to the preset TA volume

 

level if the current level is lower than the preset

 

level (see page 15).

 

To activate TA Standby Reception

 

 

The TP (Traffic Programme)

 

 

indicator either lights up or

 

 

flashes.

 

If the TP indicator lights up, TA Standby Reception is activated.

If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.)

To activate TA Standby Reception, tune in to another station providing these signals. The TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM.

To activate and select your favorite PTY code

for PTY Standby Reception, see page 15. The PTY indicator either lights up or flashes.

If the PTY indicator lights up, PTY Standby Reception is activated.

If the PTY indicator flashes, PTY Standby Reception is not yet activated.

To activate PTY Standby Reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 15). The PTY indicator goes off.

9