ENGLISH
2
Indication [Range]
BAS*1 (bass)
Adjust the bass.
TRE*1 (treble)
Adjust the treble.
FAD*2 (fader)
Adjust the front and rear speaker balance. [R06 to F06]
BAL*3 (balance)
Adjust the left and right speaker balance. [L06 to R06]
LOUD*1 (loudness)
Boost low and high frequencies to produce a
SUB.W*4 (subwoofer)
Adjust the subwoofer output level. [00 to 08]
VOL (volume)
Adjust the volume. [00 to 30 or 50*5]
*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode
*2 If you are using a
*3 This adjustment cannot affect the subwoofer output.
*4 This takes effect only when a subwoofer is connected.
Displayed only when “L/O MODE” is set to “WOOFER” (see page 13).
*5 Depending on the amplifier gain control setting. (See page 13 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items listed in the table that follows.
1
2Select a PSM item.
3Adjust the PSM item selected.
Ex.: When “DIMMER” is selected
4Repeat steps 2 and 3 to adjust other PSM items if necessary.
5Finish the procedure.
12