Radio operations
~ 
Ÿ 
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Selected band appears.
!Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button again.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz
To tune in to a station manually
In step ! above...
1
2Select a desired station frequency.
When an FM stereo broadcast is hard to receive
ENGLISH
Lights up when monaural mode is activated.
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting— SSM
1Select the FM band (FM1 – FM3) you want to store into.
2
3
“SSM” flashes, then disappears when automatic presetting is over.
Local FM stations with the strongest signals are searched and stored automatically in the FM band.
7