ENGLISH

Remote controller — RM-RK60

This unit can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK60 with your unit.

Installing the lithium coin battery (CR2025)

Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between.

Warning:

Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.

Store the battery in a place where children cannot reach to avoid risk of accident.

To prevent the battery from over-heating, cracking, or starting a fire:

Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

Do not leave the battery with other metallic materials.

Do not poke the battery with tweezers or similar tools.

Wrap the battery with tape and insulate when throwing away or saving it.

Caution:

Main elements and features

1 (standby/on attenuator) button

Turns the power on if pressed briefly or attenuates the sound when the power is on.

Turns the power off if pressed and held. 2 SRC (source) button

Selects the source.

3R (reverse) / F (forward) buttons

Searches for stations (or services) if pressed briefly.

Searches for ensembles if pressed and held.

Fast-forwards or reverses the track if pressed and held.

Changes the tracks if pressed briefly.

While listening to an Apple iPod or a JVC D. player (in menu selecting mode):

Selects an item if pressed briefly. (Then, press D (down) to confirm the selection.)

Skips 10 items at a time if pressed and held.

4SOUND button

Selects the sound mode (C-EQ: custom equalizer).

20