JVC KD-LH401 service manual Removing the front board See Figs.15 to, Rear cover assembly P

3.1.10 Removing the front board (See Figs.15 to 18)

•Prior to performing the following procedures, remove the front panel assembly.

(1)From the rear side of the front panel assembly, remove the four screws P attaching the rear cover assembly to the front panel assembly. (See Fig.15.)

(2)Release the twelve joints c of the front panel assembly and remove the rear cover assembly. (See Fig.16.)

(3)From the left side of the front panel assembly, pull out the knob in the direction of the arrow 2 while pulling the front board in the direction of the arrow 1. (See Fig.17.)

(4)Take out the front board from the front panel assembly. (See Fig.18.)

Note:

When removing the rear cover assembly and front board, be careful not to lose the comp. spring. (See Fig.18.)

P Rear cover assembly P

P

Fig.15

Rear cover assembly

joints c joints c

joints c joints c

Fig.16

Front board

Front panel assembly

	Knob
1	2

Fig.17

Front panel assembly

Front board

Comp. spring

Fig.18

1-12 (No.MA063)