JVC KD-LH401 service manual Storing DAB services in memory, To restore the FM/AM tuner, English

•The DRC indicator will be highlighted

( ) only when the unit received DRC signals from the tuned service.

To cancel the DRC effect, select “DRC Off.”

To restore the FM/AM tuner

Press and hold FM/AM DAB again.

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.

Before you start....

Press FM/AM DAB briefly if CD, CD changer, or external component is the current source.

1 Select the DAB tuner.

Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.

2 Select the DAB band (DAB1, DAB2, or DAB3).

Each time you press the button, the DAB band changes as follows:

3 Tune in to an ensemble you want.

4 Select a service of the ensemble you want to listen to.

To select the next service

To select the previous service

5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.

The display pattern automatically changes to the non-animation display and the preset number flashes (then the previous display pattern resumes).

6 Repeat the above procedure to store other DAB services into other preset numbers.

Notes:

•You can only preset primary DAB services. If you store a secondary service, its primary service will be stored instead.

•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.

•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the DAB services again.

ENGLISH

65