JVC KD-LH401 Removing the mode sw. / select lock arm See Figs.22 and, Select lock, arm spring

3.2.11Removing the mode sw. / select lock arm (See Figs.22 and 23)

•Prior to performing the following procedure, remove the top plate assembly.

(1)Bring up the mode sw. to release from the link plate (joint t) and turn in the direction of the arrow to release the joint u.

(2)Unsolder the wire of the mode sw. marked s if necessary.

(3)Turn the select lock arm in the direction of the arrow to re- lease the two joints v.

(4)The select lock arm spring comes off the select lock arm at the same time.

Link plate Joint t

Mode sw.

Select lock arm

Joint u	s
Fig.22
Select lock arm		Top plate
		Hook w
Select lock arm
Top plate		Select lock
		arm spring

Joints v

Link plate

Fig.23

(No.MA063)1-21