JVC KD-LH401 service manual Activating the downloaded images and animations, Select User

Activating the downloaded images and animations

Activating the animations stored for opening and ending screens

After the unit turns on or before the unit turns off, you can see preset animations on the display. These are called opening screen and ending screen. You can use your own edited animations for these opening and ending screens.

•Before performing the following procedure, make sure that “KeyIn CFM” is set to “On”; otherwise, the animations may not be shown. (See page 48.)

•If no animation is stored in “Opening” and “Ending,” “Opening” and “Ending” cannot be selected as a PSM item.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 46 and 47.)

3 Select “Opening” (opening screen setting) or “Ending” (ending screen setting).

Ex.: When you select “Opening”

4 Select “User.”

•Default: Factory-preset animation is used.

•User: Your own edited animation is used.

5 Finish the setting.

ENGLISH

2 Press number button 1 to select “MOVIE”—Movie category of the PSM settings.

The “Graphics” setting screen appears on

the display.

Activating the graphic screen using either picture or movie

Using this setting, you can change the graphic displays. These graphic screens appear if no operation is done for about 20 seconds.

•If no image is stored in “Picture,” or no animation in “Movie,” “UserPict.,” “UserMovie” and “UserSlide” cannot be selected for the “Graphics” setting.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 46 and 47.)

CONTINUED ON THE NEXT PAGE

43