JVC KD-LH401 service manual Using TA Standby Reception, English, Finish the setting

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 46 and 47.)

2 Press number button 4 to select “TUNER”—Tuner category of the PSM settings.

The “PTY Stnby” (standby) setting screen

appears on the display.

3 Select “AF-Regn’l” (alternative frequency/regionalization reception).

4 Select the desired mode—“AF,” “AF Reg,” or “Off.”

5 Finish the setting.

Using TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to the Traffic Announcement (TA) from the current source (another FM station, CD, or other connected components).

•See also “Road Traffic News Standby Reception (TA Standby Reception)” on page 67.

Press TP/PTY to activate TA Standby Reception.

Each time your press the button, this function is turned on and off alternately.

TP indicator appears. (either lights up or flashes)

Note:

TA Standby Reception will not work if you are listening to an AM station.

7When the current source is FM, the TP indicator either lights up or flashes.

•If the TP indicator lights up, TA Standby Reception is activated.

If a station starts broadcasting a traffic announcement, “Traffic News” appears on the display, and this unit automatically tunes in to the station. The volume changes to the preset TA volume level (see page 21) and the traffic announcement can be heard.

•If the TP indicator flashes, TA Standby Reception is not yet activated since the station being received does not provide the signals used for TA Standby Reception.

To activate TA Standby Reception, you need to tune in to another station providing these signals. Press ¢ or 4 to search for such a station.

When a station providing these signals is tuned in, the TP indicator stops flashing and remains lit. Now TA Standby Reception is activated.

CONTINUED ON THE NEXT PAGE

ENGLISH

17