JVC KD-LH401 service manual Removing the gears See Figs.37 to, Pull out the feed gear

3.2.17 Removing the gears (See Figs.37 to 40)

•	Prior to performing the following procedure, remove the top
	cover, chassis unit, top plate assembly and pickup unit.
•	Pull out the loading gear 3. (See Fig.35.)
	(1)	Pull out the feed gear.
	(2)	Move the loading plate assembly in the direction of the ar-
		row to release the L side plate from the two slots m' of the
		chassis rivet assembly. (See Fig.37.)
	(3)	Detach the loading plate assembly upward from the chas-
		sis rivet assembly while releasing the joint n'. Remove the
		slide hook and loading plate spring from the loading plate
		assembly.
	(4)	Pull out the loading gear 2 and remove the change lock le-
		ver.
	(5)	Remove the E ring and washer attaching the change gear
		2.
	(6)	The change gear 2, change gear spring and adjusting
		washer come off.
	(7)	Remove the loading gear 1.
	(8)	Move the change plate rivet assembly in the direction of the

	Joint p'
Change plate
rivet assembly
Shafts	Loading gear 4
	Loading gear plate
	rivet assembly
	Shaft
	Loading gear 2
	Loading gear 1
	Chassis rivet assembly
E ring	Change gear 2
	Fig.38

	arrow to release from the three shafts of the chassis rivet
	assembly upward. (See Fig.38.)
(9)	Detach the loading gear plate rivet assembly from the shaft
	of the chassis rivet assembly upward while releasing the
	joint p'. (See Figs.38 and 40.)
(10)	Pull out the loading gear 4.

Slot m'

L side plate

Loading plate assembly

Loading plate spring

Joint n'

Slide hook

L side plate

Slot m'

Loading plate assembly

Joint n'

Slot m'

Feed gear

Slot m'

Chassis rivet assembly

Fig.39

E ring

Chassis rivet assembly

Fig.37

Washer

Change gear 2

Change gear spring

Adjusting washer

Change plate rivet assembly

Loading gear 1

Loading gear 2

Change lock lever

Loading gear 4

Chassis rivet assembly

Loading gear plate rivet

assembly

Fig.40

1-26 (No.MA063)