JVC KD-LH401 service manual Reassembling the mode sw. / select lock arm See Figs.24 to, Reference

3.2.12Reassembling the mode sw. / select lock arm (See Figs.24 to 26)

REFERENCE:

Reverse the above removing procedure.

(1)Reattach the select lock arm spring to the top plate and set the shorter end of the select lock arm spring to the hook w on the top plate.

(2)Set the other longer end of the select lock arm spring to the boss x on the underside of the select lock arm, and join the select lock arm to the slots (joint v). Turn the select lock arm as shown in the figure.

(3)Reattach the mode sw. while setting the part t to the first peak of the link plate gear, and join the joint u.

CAUTION:

When reattaching the mode sw., check if the points y and z are correctly fitted and if each part operates properly.

Select lock arm spring

Hook w

Joint v

Joint v

Select lock arm

Boss x

Fig.24

Joint t

Point y

Link plate

Point z

Fig.25

Mode sw.

Select lock arm

Joint t

Link plate

Joint u

Fig.26

1-22 (No.MA063)