JVC KD-LH401 Storing your own sound modes 4 Make adjustments as you like, Press SEL select once

Storing your own sound modes 4 Make adjustments as you like.

You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2, and USER 3).

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press SEL (select) once.

The last selected sound mode is called up.

The next-step-operation buttons start flashing.

Ex.: If you have selected “Country” previously

2 Select the sound mode you want to adjust.

•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).

1)Press ¢ or 4 to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz.

2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

5 Store the adjustment you made.

The confirmation message

appears—whether you want to store the adjustment.

If you want to cancel the adjustments,

press D DISP.

6 Select one of the user sound modes (USER 1, USER 2, or USER 3) you want to store into.

ENGLISH

3 Enter the sound adjustment mode.

The following sound mode adjustment screen appears on the display.

Ex.: When you select “User 1”

35