JVC KD-LH401 K L K, Removing the rear bracket See, Removing the gear bracket unit See, Reference

3.1.8Removing the rear bracket (See Fig.13)

•Prior to performing the following procedures, remove the front panel assembly, heat sink, top chassis assembly and main board.

(1)From the rear side of the main board, remove the wires from the rear bracket in the direction of the arrow.

(2)Remove the two screws K and screw L attaching the rear bracket to the main board.

3.1.9 Removing the gear bracket unit (See Fig.14.)

•Prior to performing the following procedures, remove the front panel assembly, heat sink, top chassis assembly and main board.

(1)From the top side of the bottom chassis assembly, remove the screw M attaching the FPC guide to the bottom chas- sis.

(2)Remove the five screws N attaching the gear bracket unit to the bottom chassis.

Reference:

When attaching the screws M and N, apply a locking agent them.

(3)Take out the gear bracket unit from the bottom chassis.

Wire	Main board
Wire	Wire holder

Rear bracket

Slots

Rear bracket

K

L K

Fig.13

Gear bracket unit

Bottom chassis

N	N
FPC guide	M
	Fig.14

(No.MA063)1-11