JVC KD-LH401 service manual Selecting a preset station directly

ENGLISH

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 12 and 13.

Selecting a preset station directly

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

2 Select the number (1 – 6) for the preset station you want.

Selecting a preset station using the preset station list

If you forget what stations are stored in which preset numbers, you can check the preset station list, then select your desired station.

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

2 Press and hold 5 (up) or ∞ (down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display.

The current station will be highlighted on the display.

Ex.: When you select the preset station number 1 of the FM1 band

Notes:

•You can show the other FM band preset station lists (FM1, FM2, or FM3) by pressing 5(up) or ∞(down).

•If a preset station is an FM RDS station with PS (programme station) signal, PS name will be shown instead of the station frequency.

3 Select the number (1 – 6) for the preset station you want.

14