JVC KD-LH401 To tune in to a particular ensemble without searching, English, Before you start

ENGLISH

3 Start searching for an ensemble.

To search for ensembles of higher frequency

To search for ensembles of lower frequency

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

4 Select a service (either primary or secondary) you want to listen to.

To select the next service (If a primary service has some secondary services, they are selected before the next primary service is selected.)

To select the previous service (either primary or secondary)

To tune in to a particular ensemble without searching

Before you start....

Press FM/AM DAB briefly if CD, CD changer, or external component is the current source.

1Press and hold FM/AM DAB to select the DAB tuner as the source.

2Press FM/AM DAB repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

3Press and hold ¢ or 4 for more than one second.

4Press ¢ or 4 repeatedly until the ensemble you want is reached.

•If you hold down the button, the frequency keeps changing until you release the button.

5Press 5 (up) or ∞ (down) to select a service (either primary or secondary) you want to listen to.

When surrounding noises interfere your listening while driving

If this happens, especially when you are listening at a low volume level, you can reinforce the sounds to improve for your listening.

For this purpose, some service provides Dynamic Range Control signals together with their regular program signals.

1Press M MODE while listening to a DAB

service.

“Mode” appears on the display. The next-step-operation buttons start flashing.

2Press number button 1 repeatedly to activate the DRC function while “Mode” is still on the display.

Each time you press the button, the DRC function will be set as follows:

As the number increases, the DRC effect level also increases.

After about 5 seconds

DRC indicator appears.

64