3.2.18Removing the turn table / spindle motor (See Figs.41 and 42)

Prior to performing the following procedure, remove the top cover, connector board, chassis unit and clamper assembly.

(1)Remove the two screws L attaching the spindle motor as- sembly through the slot of the turn table on top of the body.

(2)Unsolder the wire on the connector board if necessary.

Turn table

L

Fig.41

L

Turn table

Spindle motor

Fig.42

(No.MA063)1-27

Page 27
Image 27
JVC KD-LH401 service manual Removing the turn table / spindle motor See Figs.41