Channel selection
Reception status - radio
After switching over the receiver, simply press the oubuttons to select other radio channels in their ascending or descending order in the channel memory.
Every time you press the button, an
By pressing the Obutton, you can leave this information box permanently displayed or switch it off by pressing the button once again.
A further option of selecting a different channel is to press the ibutton. The radio channel list is now displayed. In the left column it will provide information relating to the received satellites, the transponder and its transmission frequency, the polarization, the symbol rate and the scrambling of digital channels. The right side shows the channel number, the channel broadcaster and the type of reception
signal (analogue/digital). By pressing the oubuttons you jump to the next
channel and by pressing the
Confirm your channel selection by pressing the Obutton, press the Lbutton to exit the channel list and remain in the channel already set.
Selecting a radio channel by number entry
| You can select a different radio channel during a current radio channel by entering |
| the channel location number. Use the number buttons 1to 0 for the purpose |
| of entering the channel location number. |
Example | You wish to select the radio channel |
| channel location number 015. (The order of radio channels is defined in the |
| channel memory and therefore only serves as an example here.) |
| To select this channel, press the numbers 1and 5 one after the other. The |
| receiver waits for about 3 seconds for entry of the next number. |
| Follow the same procedure for all other channels – i.e. also channels with three- |
| digit channel location numbers. You do not have to enter leading zeros. |
20
