Switching over to radio channel, Reception status analogue

Channel selection

Reception status - analogue

You can, of course, select other channels by pressing the oubuttons while receiving an analogue channel. The selection of analogue channels is indicated by the information bar being displayed briefly in white, e.g.:

TV 59

DER KINDERKA

STEREO

By pressing the Obutton, you can see the selected channel in the same form.

Press the ibutton to see the channel list indicated in white in the display. It shows the memory location, the channel name and the reception type "A" or "D" (analogue or digital). By pressing the

oubuttons and the -+buttons you can jump to the next page in the same

way as with the digital channels.

Press the Obutton to select the required channel and press the Lbutton to exit the channel list and remain in the channel already selected.

If you have now selected a digital channel, as a confirmation, the coloured display for this type of transmission will appear.

Selecting a TV channel by number entry

	You can select a different TV channel during a current TV channel by entering the
	channel location number. Use the number buttons 1to 0 for the purpose of
	entering the channel location number.
Example	You wish to select the TV channel "DSF". This channel is stored under the channel
	location number 015. (The order of TV channels is defined in the channel memory
	and therefore only serves as an example here.)
	To select this channel, press the numbers 1and 5 one after the other. The
	receiver waits for about 3 seconds for entry of the next number.
	Follow the same procedure for all other channels – i.e. also channels with three-
	digit channel location numbers. You do not have to enter leading zeros.