Analogue Decoder Connection, Modulator reception | Kathrein UFD 545

Analogue Decoder Connection

	Since you can receive analogue channels with the receiver UFD 545, it can also be
	connected to a decoder for analogue pay-TV channels.
Note	No further setting is required on decoders that require a video signal and supply a
	switching signal.
	The video signal route of the receiver must be set to external for decoders that do
	not supply a switching voltage (refer to section "Video menu").
	Also take note of the instructions provided with the decoder!
	Use a SCART cable to connect the decoder to the VCR/AUX SCART socket.
Modulator reception
	A decoder cannot be used if satellite reception is transmitted via the
	modulator output of the DVB receiver!

48

Image 48

Kathrein UFD 545 manual Analogue Decoder Connection, Modulator reception

Contents

DVB Satellite Receiver Page Foreword Important information Contents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Setting-up location VentilationMoisture, sunlight, heat Mains voltage Controls, Indicators, Displays and Connections Front viewRear view Remote control function buttons Channel Switching over between Remote Control Command Sets Receiver on the command set Menu concept Button functionsAlphanumeric entries Language selection OSD Presetting of the receiving system Connection and StartupTo connect the receiver Sat-IF connection Inserting batteries in the remote control LNB supply voltageModulator connection TV and video recorder connection Switching on for the First Time Factory setting of the receiverFirst steps OSD On-Screen Displays Important on-screen displays Channel selection Selecting a TV channelReception status digital Switching over to radio channel Reception status analogue Selecting a radio channel by number entry Timer Settings Sound Settings Setting the volumeStereo and two-channel sound reproduction Mute Channel Lists TV/radio Selecting TV and radio channels last receivedFavourite channels To sort the channels To delete a channel To add a channel To add an analogue channel Analogue channel lists To set up satellites Adding/Removing Satellites To enter a satellite name To remove satellites This function cannot be selected in analogue mode Current Channel Overview Password Factory settingEntering a password Parental control Operation from the Front Panel Operation in exceptional cases Setting System Parameters Local time/timerSystem parameters Parental control Timer menu Summer timeTV type Picture format Mod.typ Mod.ChOSD colour OSD-Trans Installation Menu LNB configuration Changing the oscillator frequency Antenna settings Satellite scan TP setup/scan Scan completed Press OK button Analogue transponder DiSEqC UFO setup KHz signal Tone burst Preprogramming is not deleted under Reset Analogue Settings Video menu HDP mode Audio modeAudio menu Decoder Frequency left/right BandwidthDe-emphasis Video Recorder Connection RecordingPlayback Analogue Decoder Connection Modulator reception Data Transfer from Receiver to Receiver PreparationTransferring channel list Transferring operating software Technical features Technical Reference Technical data HF features Accessories Scart socket assignments Connection examples Connection arrangement Analog Glossary, Abbreviations DVB Glossary of Technical Terms DiSEqC Symbol rate Service SatelliteDiSEqC menu Index DNR Index Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications