Glossary, Abbreviations, Dvb | Kathrein UFD 545 manual

Glossary, Abbreviations

Audio output	Receiver sound output
AV channel slot	Preferential channel location of TV set for SCART input
Decoder	Unscrambling unit for pay-TV
DiSEqC	Control system between receiver and LNB, multi-switch
DVB	Digital video broadcasting
Eb/No [dB]	Power density per unit of information
Eb/No ratio	Digital signal-to-noise ratio
LED display	Receiver display
LNB	Low noise block converter
Mute	Mute circuit
OSD	On-screen display
PAL	Analogue television standard (pay-TV)
Pay-TV	Pay-TV (e.g. DF1, Premiere)
PCMCIA	Standard of internal decoder interface for pay-TV
PIN	Personal identification number
Receiver	Receiver
RGB	Video signals made up of 3 individual colour signals (red, green,
	blue)
Satellite-IF signal	Receiver input signal
SCART cable	21-pin connecting cable
Standby	Standby
S-VHS	Super video home system (video recorder standard)
Symbol rate	Transmitted data rate of satellite signal
Timer function	Clock function for preprogrammed switch-on and switch-off times
Transponder	See glossary of technical terms
VCR connection	Video recorder connection
Viterbirate	See glossary of technical terms

55

Image 55

Kathrein UFD 545 manual Glossary, Abbreviations, Dvb

Contents

DVB Satellite Receiver Page Important information Foreword Contents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Mains voltage Setting-up locationVentilation Moisture, sunlight, heat Front view Controls, Indicators, Displays and ConnectionsRear view Channel Remote control function buttons Receiver on the command set Switching over between Remote Control Command Sets Button functions Menu conceptAlphanumeric entries Language selection OSD Sat-IF connection Presetting of the receiving systemConnection and Startup To connect the receiver TV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Modulator connection Factory setting of the receiver Switching on for the First TimeFirst steps Important on-screen displays OSD On-Screen Displays Selecting a TV channel Channel selectionReception status digital Reception status analogue Switching over to radio channel Selecting a radio channel by number entry Timer Settings Mute Sound SettingsSetting the volume Stereo and two-channel sound reproduction Selecting TV and radio channels last received Channel Lists TV/radioFavourite channels To delete a channel To sort the channels To add a channel Analogue channel lists To add an analogue channel Adding/Removing Satellites To set up satellites To remove satellites To enter a satellite name Current Channel Overview This function cannot be selected in analogue mode Factory setting PasswordEntering a password Parental control Operation in exceptional cases Operation from the Front Panel Parental control Setting System ParametersLocal time/timer System parameters Picture format Timer menuSummer time TV type OSD-Trans Mod.typMod.Ch OSD colour LNB configuration Installation Menu Changing the oscillator frequency Satellite scan Antenna settings Scan completed Press OK button TP setup/scan Analogue transponder KHz signal DiSEqC UFO setup Tone burst Preprogramming is not deleted under Reset Video menu Analogue Settings Decoder HDP modeAudio mode Audio menu Bandwidth Frequency left/rightDe-emphasis Recording Video Recorder ConnectionPlayback Modulator reception Analogue Decoder Connection Transferring operating software Data Transfer from Receiver to ReceiverPreparation Transferring channel list Technical Reference Technical features HF features Technical data Scart socket assignments Accessories Connection arrangement Connection examples Analog DVB Glossary, Abbreviations DiSEqC Glossary of Technical Terms Symbol rate Satellite ServiceDiSEqC menu DNR Index Index Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications