Mod.typ, Mod.Ch, OSD colour, OSD-Trans | Kathrein UFD 545 manual

Setting System Parameters

Mod.typ

Here you can set the PAL variant corresponding to your TV set.

Refer to the operating manual of your TV set!

The factory setting is PAL-G.

Mod.Ch

In this position you can set the "transmit channel", on which your TV set is to receive the receiver signal when it is connected to the receiver by means of a coaxial cable.

In the event of disturbances caused by terrestrial stations, set this channel, while observing the TV screen, such that the receiver signal is reproduced without disturbances. Rule of thumb: A spacing of at least one channel should be maintained between the interference channel and receiver channel.

The factory setting is channel 38 UHF.

OSD colour

Use the -+buttons to select the background colour of the on-screen displays.

Confirm by pressing Ltwice

OSD-Trans

Use the -+buttons to select the transparency of the background colour.

Confirm by pressing Ltwice

35

Image 35

Kathrein UFD 545 manual Mod.typ, Mod.Ch, OSD colour, OSD-Trans

Contents

DVB Satellite Receiver Page Important information Foreword Contents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Mains voltage Setting-up locationVentilation Moisture, sunlight, heat Rear view Controls, Indicators, Displays and ConnectionsFront view Channel Remote control function buttons Receiver on the command set Switching over between Remote Control Command Sets Alphanumeric entries Menu conceptButton functions Language selection OSD Sat-IF connection Presetting of the receiving systemConnection and Startup To connect the receiver TV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Modulator connection First steps Switching on for the First TimeFactory setting of the receiver Important on-screen displays OSD On-Screen Displays Reception status digital Channel selectionSelecting a TV channel Reception status analogue Switching over to radio channel Selecting a radio channel by number entry Timer Settings Mute Sound SettingsSetting the volume Stereo and two-channel sound reproduction Favourite channels Channel Lists TV/radioSelecting TV and radio channels last received To delete a channel To sort the channels To add a channel Analogue channel lists To add an analogue channel Adding/Removing Satellites To set up satellites To remove satellites To enter a satellite name Current Channel Overview This function cannot be selected in analogue mode Entering a password PasswordFactory setting Parental control Operation in exceptional cases Operation from the Front Panel Parental control Setting System ParametersLocal time/timer System parameters Picture format Timer menuSummer time TV type OSD-Trans Mod.typMod.Ch OSD colour LNB configuration Installation Menu Changing the oscillator frequency Satellite scan Antenna settings Scan completed Press OK button TP setup/scan Analogue transponder KHz signal DiSEqC UFO setup Tone burst Preprogramming is not deleted under Reset Video menu Analogue Settings Decoder HDP modeAudio mode Audio menu De-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Modulator reception Analogue Decoder Connection Transferring operating software Data Transfer from Receiver to ReceiverPreparation Transferring channel list Technical Reference Technical features HF features Technical data Scart socket assignments Accessories Connection arrangement Connection examples Analog DVB Glossary, Abbreviations DiSEqC Glossary of Technical Terms Symbol rate DiSEqC menu ServiceSatellite DNR Index Index Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications